MLA honeycomb handpiece of Picosecond laser Nd yag tattoo removal machine
Picoseconds can be understood as an upgraded version of the traditional Q-switch, mainly dealing with chloasma, freckles, senile plaques and other dermis and epidermis pigmentary diseases, as well as a variety of color tattoos, scars, rough skin and other issues. But why did the name change after Q-switched lasers were upgraded to picosecond lasers? Because this upgrade is not only a little change,but a cross-age significance.
The main difference between picoseconds and Q-switching is the pulse width, an important parameter of the laser. Like the speed of vehicles, the pulse width is very important for lasers. In general, the pulse width of traditional Q-switching can be as low as 4 to 5 nanoseconds, and the picoseconds are exemplified at the most advanced level, can reach 450ps below, convert into nanosecond is below 0.45ns, the short pulse width already exceeds the Q-switched laser many times.
Because the pulse width is short, the peak energy it carries is high, which can be easily imagined. When the picosecond laser strikes it, it will be crushed even more completely. It will naturally be easier for the body to metabolize and recover, it's a lot shorter than before, and it's broken thoroughly so that pigmentation is not easy to produce.
Is it warrantied if just has picosecond ? Of course not. In addition to the pulse width, the laser depends on the wavelength. The wavelength determines the nature of the laser. No one wavelength is better than the other. Therefore, it cannot be considered that the instrument is good and all clinical treatments are Well, this is the reason why there are so many instruments for skin treatment. Each has its own strengths. It cannot overshadow all shortcomings because of its strengths. The demand for the clinic determines the demand for the instruments and distinguishes the instruments. The advantage is important.
MLA Mode Handpiece.
Advantages
1, South Korea imported 7 joint articulated arm
360 treatment without dead angle and ensure the highest energy output minimum energy loss during laser transmission
2, Variety of Wavelengths and handpieces Available
1064nm:Dermal pigment lesions and dark color tattoo removal
532nm: Epidermal pigment lesions,red, yellow, coffee tattoo removal
585nm:blue and purple tattoo removal
650nm:Green tattoo removal
755nm:Epidermal pigment lesions
Fractional Handpiece: wrinkle removal and skin rejuvenation
3, High peak power
1200mj High single pulse energy means strong ability to crushes the pigment to make it bane of full range of pigmentations
4, Aming beam(635nm)
For targeted and precise treatment
5, High quality laser source
USA imported Q switch and laser bar, Germany Heraeus Xenon lamp, Aluminium laser case
6, Short pulse width (600ps)
Efficient destruction of the target pigment with minimal collateral thermal damage meeting the criteria of selective photothermolysis
7, Flat-top hat Beam
Ensure that the energy is delivered efficiently to maximize effect while minimizing damage to surrounding tissue
8, 2-10mm adjustable spot size.
Energy density is automatically adjusted with spot size
Technical Parameter
| Wavelength | 1064nm 532nm Standard; 585nm,650nm,755nm Optional |
| Energy | Max 500mj (1064) ;Max 230mj (532) |
| Peak Power | 1064nm 1GW; 532nm 0.5GW |
| Frequency | 1~10Hz |
| Zoom Spot Size | 2-10mm Adjustable |
| Pulse Width | 600ps |
| Beam Profile | Top Hat Beam |
| Light Guiding System | South Koera 7 joints Arm |
| Aiming Beam | Diode 655 nm (Red), Adjustable Brightness |
| Voltage | AC220v±10% 50Hz,110v±10% 60Hz |
| Net Weight | 85kg |
| Dimension | 68*79*120cm |
“Carbon Laser Skin Rejuvenation” is a non invasive and pain-free laser treatment that is great for treating minor skin imperfections and giving skin a glow from within. This laser facial is delivered by a state of the art Q-switched Nd-Yag Laser machine producing short, rapid and high intensity pulses of light with maximum capability for destruction of debris clogged in the pores and upper layers of skin.
